Fitter platform

The fitter platform is the main operating platform for fitters to operate mechanical equipment.According to different purposes,the fitter workbench is mainly divided into three categories:assembly fitter platform,inspection fitter platform,and marking fitter platform.

The fitter platform is suitable for various inspection work and measurement reference planes,used for machine tool mechanical measurement reference,checking the dimensional accuracy or positional deviation of parts,and making lines.It is also a basic tool in mechanical manufacturing.

Clamping platform:The working surface of the clamping platform is machined with T-shaped grooves,which are mainly used to fix workpieces.The clamp worker platform is the basic work platform used by clamp workers to debug,assemble,and repair equipment.

Inspection fitter platform:The inspection fitter platform is suitable for various inspection work and is the reference plane for measuring the accuracy of fitters.The inspection fitter platform is used as a measurement benchmark for machine tool mechanical inspection,checking the dimensional accuracy or behavioral deviation of parts,and making lines.The inspection fitter platform is a basic tool in mechanical manufacturing and inspection.

Marking bench platform:There are marking lines on the working surface of the marking bench platform.The marking lines are the reference marking lines used by bench workers to inspect workpieces and mark workpieces.The specific dimensions of the marking lines are determined by the user based on their usage.

The cast iron fitter platform is suitable for various assembly,welding,inspection,and marking work.It is a reference plane for precision measurement,used for machine tool mechanical assembly,inspection and measurement standards,checking the dimensional accuracy or behavioral deviation of parts,and performing assembly,welding,and marking.It is also a basic tool in mechanical manufacturing.The working surface of the fitter platform is made with T-shaped grooves,mainly used to fix workpieces.It is the basic working platform for fitters to debug equipment,assemble equipment,and inspect and maintain equipment.

Material and treatment of cast iron fitter platform:

The material of the cast iron fitter platform is HT200,HT250,HT300,and the working surface hardness is HB170-240.After two manual treatments(artificial annealing at 600-700 degrees)or natural aging for 2-3 years,the accuracy of the fitter platform is stable,good,and the service life of the fitter platform is extended,with high economic value.

Precision of cast iron fitter platform:

According to the standard metrological verification regulations,there are four levels:0,1,2,3,and 4.The working surface of the fitter platform adopts scraping technology,which has good planar stability and toughness.It can process V-shaped,T-shaped,U-shaped grooves,circular holes,long holes,etc.on it.

Specification of cast iron fitter platform:

The company has a standard specification fitter workbench of 200x200-2000x4000,which is available in stock and can be produced according to the actual needs of customers.

Inspection methods and standards for fitter platforms:

A level 0 and level 1 tablet platform shall have no less than 25 points within a range of 25mm square on each side.

The second level tablet platform shall have no less than 20 points within a range of 25mm square on each side.

A level 3 tablet platform shall have no less than 12 points within a range of 25mm square on each side.

The working surface of the fitter platform should not have rust,scratches,scratches,or other appearance defects that affect its use.

The working surface should not have casting defects such as sand holes,pores,cracks,slag inclusions,and shrinkage porosity.The surface of various castings should be sandblasted,flat,and painted firmly.Each edge should be rounded off.Cast iron platforms are allowed to use the same material to block sand holes with a diameter of less than 15mm on platforms with an accuracy level below"00",and their hardness should be lower than that of the surrounding materials.There should be no more than four blocked areas on the working face,and the distance between them should not be less than 80mm.