How to Reasonably Design Reinforced Ribs for Cast Iron Platforms

The reinforcement ribs set up on the cast iron platform can improve the structural strength of the cast iron mold, avoid cracking of the flat plate due to excessive internal stress, enhance the strength of the cast iron mold's resistance to thermal expansion and contraction, and even if cracking occurs, it is easy to stop welding and repairing its cracks, so it can be repeatedly used to enhance the bearing capacity of the cast iron platform, reduce the deformation of the platform under heavy loads, and extend the service life of the cast iron platform.

Reinforcing ribs on the cast iron platform are an indispensable part. The reinforcing ribs on the cast iron platform can increase the rigidity and strength of the cast iron platform like I-shaped iron, without significantly increasing the cross-sectional area of the cast iron platform. The reinforcing ribs are usually designed on the non-contact surface at the bottom of the cast iron platform, and their extension direction follows the direction of the product's high stress and large displacement. The selection of the position of the reinforcing ribs should be subject to some consumer considerations. The length of the reinforcing rib is different from the length of the cast iron platform, and the two ends are connected to the extension of the cast iron platform, or the overall length of the cast iron platform is the same. The reinforcing ribs inside the cast iron platform are usually spaced 500mm apart. If the size of the cast iron platform is small, it can also be designed according to practical conditions.

Cast iron platforms are important supplies in mechanical processing. Choosing a good cast iron platform is an essential condition for developing the machinery industry, so as to meet the needs of the machinery industry for consumption.