Measures for maintenance and upkeep of the marking platform

Introduction

1. When placing workpieces on the platform, they should be handled gently to prevent the platform surface from being hit. Once the surface of the flat plate is hit by workpieces or other objects, the protruding parts should be immediately serviced with care

2. Never perform any work that requires hammering on the surface of the marking platform3. After using the tablet, it should be wiped clean. If not used for a long time, anti rust oil should be applied to prevent rust4. The marking platform should be used evenly throughout as much as possible to avoid local scratches5. It is important to regularly maintain the cleanliness of the platform to prevent it from being damaged by impurities such as iron filings and sandTo prevent unnecessary deformation of the marking platform, the support should be placed at the main support point when assembling the platform. When supporting, try to adjust the working surface of the platform to the horizontal plane as much as possibleTo prevent long-term deformation of the platform, after inspection or marking, the workpiece should be lifted down and not placed on the platform for a long time8. After use, clean the working surface of the flat plate in a timely manner, and then apply a layer of anti rust oil. If not used for a long time, apply a layer of butter and then lay a layer of white paper9. A one-on-one cover made of wooden boards is easy to use. When not using a platform, cover the platform with a cover. Water droplets are strictly prohibited on the platform

3. The tablet should undergo periodic calibration, and the calibration cycle should be determined based on the specific situation of use, generally 1 year.

During the use of cast iron marking platforms, attention should be paid not to use and store them in damp, corrosive, high and low temperature environments