Electric motor experimental workbench

The material of the motor experimental workbench is HT200-300,which is made of resin sand and lost foam casting,and customized according to different customer requirements.

Daily maintenance of the motor experimental workbench:

In order to prevent deformation of the motor experimental workbench,when lifting the motor experimental workbench,four steel wire ropes of the same length should be used to hang the four lifting holes on the motor experimental workbench at the same time,and the motor experimental workbench should be smoothly lifted onto the transportation tool.

Pad and level the support points of the motor experimental workbench,ensuring that each support point receives even force and the entire motor experimental workbench is stable.

When installing the motor experimental workbench,the various support points of the motor experimental workbench are padded and compacted with adjusting shims,and the technical personnel adjust the motor experimental workbench to a qualified accuracy.

When using the motor experimental workbench,handle the workpiece gently and do not move rough workpieces on the motor experimental workbench to avoid damage such as bumps and scratches on the working surface of the motor experimental workbench.

In order to prevent the overall deformation of the motor experimental workbench,after use,the workpiece should be removed from the motor experimental workbench to avoid the deformation of the motor experimental workbench caused by the long-term heavy pressure of the workpiece on the motor experimental workbench.

When the motor experimental workbench is not in use,the working surface should be cleaned in a timely manner,then coated with a layer of rust proof oil,and covered with rust proof paper.The outer packaging of the motor experimental workbench should be used to cover it well to prevent damage to the working surface of the motor experimental workbench caused by carelessness.

The motor experimental workbench should be installed in a ventilated and dry environment,away from heat sources,corrosive gases,and liquids.The motor experimental workbench is regularly inspected according to standards,and the calibration cycle can be 6-12 months depending on specific circumstances.Packaging:There are two forms of packaging:iron platform packaging and wooden packaging.The platform surface is sealed with plastic film.This type of packaging is suitable for inland transportation on the platform and has good measures to protect the platform,such as shock resistance,rust prevention,and anti rough loading and unloading,for transportation to the site.