High neck tapping ring wrench

The high neck tapping ring wrench is at a right angle to the base surface of the handle,and has characteristics such as friction and impact,no mechanical sparks,and corrosion resistance and anti magnetism.It is made of carbon steel or tool steel.Especially suitable for tightening and disassembling bolts and nuts in concave and deep positions.

High necked tapping ring wrench material

The material of the high neck tapping ring wrench is 45#medium carbon steel or 40Cr alloy steel;The manufacturing process is made by integral forging and processing.

Characteristics of high neck tapping ring wrench:

1.High neck tapping ring wrench,structurally stable,material,impact resistant,non folding,product,etc.

2.The production process of the high neck tapping plum blossom wrench is used,which is forged and stretched using a 1600 ton large friction press.The surface is smooth,the handwriting is clear,and the toughness is good.The appearance is beautiful and visually appealing.

3.According to market research,most of the high necked impact wrenches on the market are welded products or cast,with rough surfaces and easily broken stress areas;Casting products have casting defects,are prone to bending and fracture,and products of the same specifications have uneven length and short service life.

High neck tapping ring wrench Applicable range:

The high neck tapping ring wrench is suitable for industries such as petroleum,chemical,gas,power,mining,pharmaceuticals,etc.

Instructions for using a high neck tapping ring wrench:

When in use,apply external force along the direction of thread rotation to the handle to tighten the bolt or nut.Select the corresponding wrench according to the characteristics of the fastener being tightened.Tighten,grip the end of the lever with your hand,and tighten it with force in a clockwise direction;Loosen and rotate counterclockwise.An ideal tool for installing and maintaining equipment in flammable and explosive environments with combustible gases or dust.