Bent handle crowbar box wrench

The bent handle pry bar plum blossom wrench is mainly used in flammable and explosive workplaces.In these workplaces,using our tools will not generate sparks,such as knocking,friction,falling hammer,impact,etc.,so customers can use our products with confidence.

This type of bent handle crowbar wrench is particularly suitable for use in flammable,explosive,and corrosive workplaces such as electronics,petroleum,chemical,gas extraction,gas transfer,gas stations,railways,and mines.We produce two types of crowbar wrenches.Beryllium bronze alloy products are both anti magnetic and can achieve a tensile strength of over 35 degrees after processing.

The usage method of the bent handle crowbar box wrench:

When using a ring wrench,use your left hand to push the connection between the ring wrench and the bolt,keep the ring wrench in place with the bolt to prevent slipping,and hold the other end of the ring wrench with your right hand and apply force.A ring wrench can wrap all the heads of bolts and nuts,so it will not damage the bolt corners and can apply a large torque.

Notes on the use of a bent handle crowbar box wrench:

When turning,it is strictly prohibited to put an extended pipe on the wrench to extend the length of the wrench and increase the torque.It is also strictly prohibited to hammer the wrench to increase the torque,otherwise it will cause damage to the tool.

It is strictly prohibited to use ring wrenches with cracks and severely worn inner holes.