Arc-shaped rainproof cover

The arc-shaped rainproof cover is made of pressed color steel plate,which is coated with cold-rolled steel plate,galvanized steel plate,surface chemical treatment,coating(roller coating)or composite film(PVC film,etc.),and then baked and cured to make the product.Some people also refer to this product as"pre roll coated color steel plate"or"plastic color steel plate".

1.Among the four forms of conveyor rain covers,the fixed cover and the open and closed cover are both made of galvanized corrugated steel plate or color coated steel plate.Generally,there are 9 fixed covers and 1 open and closed cover in every 10 cover positions,and the two types of covers can be arranged alternately.When installing,press the open and close cover onto the two adjacent fixed covers on the left and right,with a overlapping length of one or two wave lengths.Pay attention to placing the hinged side of the open and close cover on the non passing edge of the conveyor,and the side with a locking buckle on the passing edge of the conveyor.

2.As a fixed frame for the conveyor cover,it is made of connecting angle steel or Z-shaped steel,and its length is equal to the installation length of the conveyor cover.Weld the connecting angle steel or Z-shaped steel onto the channel steel or small angle steel on both sides of the conveyor frame.If it is necessary to install support angle steel,first weld the support angle steel to both sides of the frame,and then weld the connecting angle steel or Z-shaped steel to the support angle steel.

3.Install the rain cover from one end of the rack to the other in a"product"shape.During installation,no one is allowed to stand on the rain cover and do not use force to hit or strike it.

4.Fix the rain cover onto the connecting angle steel or Z-shaped steel using self tapping screws,with at least 4 fixing points per piece.

5.Every 10 pieces,one observation type rain cover can also be installed for easy maintenance and inspection.

6.The folding point cover is only used at the folding point of the convex arc section of the conveyor,while the deviation switch cover is specifically designed to cover the deviation switch.Both are covered on a fixed cover.

The arc-shaped rainproof cover is suitable for preventing rain,dust,and wind on the conveyor belt of major factories and mining enterprises such as power plants,cement plants,and coal mines.It reduces the loss of goods during the transportation process and helps to purify the environment during the operation of the conveyor belt.

Installation instructions for curved rainproof cover:

1.When installing,overlap the rainproof cover shaped finished product in the order of Type II-I,and install it from one end of the belt conveyor to the other end.

2.When installing,type I is located at the bottom and type II is located at the top,overlapping with a wave.

3.During installation,installation personnel are not allowed to stand on the cover,and violent collisions and impacts should be avoided during installation and use.

4.After positioning the rain cover,use bolts or fixtures to connect the flange edge of the cover to the conveyor support plate,and each cover must have at least 4 connection fixing points.