High precision swing inspection instrument

The deflection tester is equipped with a pair of 4#hard alloy and gear transmission,which improves the measurement accuracy of ordinary deflection testers and increases the support weight of the tested parts.It can measure the radial,end face,and oblique circular runout of the parts.The watch stand,up and down,front and back,and left and right can be adjusted smoothly and freely,making it easy to operate.The watch stand has good rigidity and improves the sensitivity of the testing instrument,making it particularly suitable for testing products processed by grinding machines.

Characteristics of the yaw tester:

1.Equipped with a pair of Mohs 4#hardness alloys,the gear transmission operation improves the measurement accuracy of the yaw meter,increases the support weight of the tested parts,and can measure the radial,end face,and oblique circular runout of precision parts.Especially suitable for grinding products.

2.The indicator is adjusted by the watch stand,which is designed with exquisite and reasonable design.The up and down,front and back,left and right adjustments are smooth and easy to operate.The watch stand has good rigidity,which improves the sensitivity of the detection instrument.

3.Measurement length:500mm(A05)800mm(A08)1000mm(A10)2000mm(A20)

Technical parameters of the yaw tester:

1.Radial rotation accuracy:0.001mm;

2.The parallelism of the two connecting lines along the entire length of the side guide rail;

3.Large diameter of the tested part:500mm;

4.The length of the tested part is 500mm 800mm 1000mm 2000mm.