Diagonal pad iron

Diagonal pad iron can be divided into three types:cast iron diagonal pad iron,steel diagonal pad iron,and diagonal pad iron.The material of cast iron diagonal pad iron is HT250,and the steel diagonal pad iron is made of Q235 low-carbon steel forged or mechanically processed.The material of the diagonal pad iron is beryllium bronze diagonal.

Introduction to the specifications of diagonal pad iron:

The diagonal pad iron generally does not have specific specifications,and is usually designed according to the equipment weight drawing and customized for processing.But the commonly used specifications are 100*50;120*60;120*80;150*80;160*80;200*100;200*120;200*150;240*120;300*150;Wait.The commonly used specifications for installing inclined pad iron on 50Hz ground rails are 100*50120*60,150*80,180*90,200*100,etc.The thickness depends on the height of the guide rail,and the inclination is generally more than 3.We have also customized one for customers,which is 150*80*30-8,requiring U-shaped grooves with a width of 25-30 and a length of about 110.

Manufacturing process of inclined pad iron:

Diagonal pad iron can be roughly divided into three types:forged diagonal pad iron,cast diagonal pad iron,and steel plate processed diagonal pad iron.The surface of the forged inclined pad iron is rough and has poor flatness,but due to its forging processing technology,the pad iron is subjected to the impact of an air hammer during the processing,resulting in an increase in its own density.Increased its strength.So it is very suitable for the installation,adjustment,and use of heavy-duty equipment.Casting inclined pad iron can generally be divided into two types:cast iron inclined pad iron and cast steel inclined pad iron.Due to the poor roughness and smoothness of its casting surface,which is not conducive to equipment adjustment,the installation and adjustment of rough equipment are generally carried out.Steel plate processing inclined pad iron,using Q235 steel plate,using gas cutting technology to form the required external dimensions of the pad iron,and then processing it with machine tools such as milling machines,sawing machines,or planers.For equipment with high requirements.After the completion of the pad iron processing,a grinding machine can be used for grinding to achieve a flatness of less than 0.02mm and a smoothness of 0.8 to meet the equipment requirements.