Machine tool adjustment pad iron

Machine tool adjustment pad iron is a type of machine tool accessory,and the installation of machine tool equipment is generally inseparable from it.It is generally used as a machine bed pad foot.It has some advantages such as low cost,large load-bearing capacity,wide adjustable range,and convenient use,and has a very high market share.

The machine tool adjustment pad iron has the function of adjustment and support.The damping rubber among them attenuates the vibration of the machine itself,reduces the external transmission of vibration force,prevents the transmission of vibration force,and improves the accuracy and quality of machining dimensions.Control the resonant propagation of vibration forces and noise in building structures.Integrate various types of rough and fine machining machines into production units to adapt to the development of logistics technology.Installing the machine tool does not require setting anchor bolts to fix it to the ground.Good vibration reduction and proper verticality make it possible to install the machine tool upstairs.It can adjust the level of the machine tool,with a wide and convenient adjustment range.Made of nitrile synthetic rubber,resistant to grease and coolant.

The structure of machine tool adjustment pad iron generally consists of three parts:1.base,2.adjustment bolt,and 3.adjustment slider.

The machine tool adjustment pad iron has the advantages of simple structure,stable performance,easy adjustment,and large bearing capacity,so it is widely used.Installing the machine tool with adjustable shims does not require setting anchor bolts to fix it to the ground,saving installation costs and shortening installation cycles.The position of the machine tool can be changed at any time according to production,and the cost of secondary installation is also included.When we use it,we only need to place the adjusting pad iron under the equipment,and then adjust the height of the pad iron as needed.The adjustable height is generally 3-15mm.When using the pad iron again,adjust the level of the machine tool after two weeks.It can improve the machining accuracy of machine tools and has the functions of shock resistance and noise reduction.Another use of adjusting the pad iron is to adjust the cast iron flat plate.The foundation plane for installing the pad iron can be made of concrete or wood,and it should be flat and sturdy.When using,place the pad iron at the bottom of the flat plate,and place a level on the working surface of the flat plate to complete the adjustment.If a heavy workpiece is placed on a flat plate,it is important to regularly check the flatness of the plate for any deviation.We still need to choose the appropriate pad iron based on the weight of the equipment in order to avoid unnecessary waste.