Marble bending plate

Marble bending plates are mainly used to inspect the 90°angle of workpieces,and to check the mutual perpendicularity of the relevant surfaces of components during equipment maintenance.They are also commonly used for marking by fitters.It can also be commonly used for inspection,installation,and vertical plane inspection of machine tools,and can check the verticality of workpieces on flat plates.It is suitable for mechanical and instrument inspection and inspection of non verticality between machine tools.

Marble bending plate is one of the important forms of marble measuring tools.After billions of years of aging,the texture is uniform,stable,strong,and can be maintained under heavy loads.The granite material,which has undergone strict physical testing and selection,is finely crystalline,hard in texture,with a compressive strength of 2290-3750 kg/square centimeter and a hardness level of 6-7 Mohs hardness.Extremely damaged,acid resistant,alkali resistant,highly resistant,and will not rust.

The main mineral components of marble curved slabs are pyroxene,plagioclase,small amounts of olivine,biotite,and trace amounts of magnetite.They have a black color and structure,and are sourced from underground rock layers.After billions of years of natural aging,their morphology is extremely stable,and there is no need to worry about deformation due to conventional temperature differences.Physically stable,organized meticulously and subjected to grain shedding due to impact,with no burrs on the surface and no impact on its planar accuracy.Specific gravity:2970-3070kg/m3,compressive strength:2500-2600kg/cm3,elastic coefficient:1.3-1.5×106kg/cm2,water absorption rate:<0.13%,Shore hardness:HS70 or above.