How to repair the damage on the surface of the marble platform

1、Repair the defective surface

After long-term use,it is inevitable that the stone on the marble platform will have partial defects.Before stopping the repair of the damaged surface of the marble platform,the damaged area should be cleaned and the dust should be sucked off with a vacuum cleaner.Then,use the same quality of discarded stone,and the discarded stone should also be cleaned.Cut the defect into local sizes,stop sealing,and then stop grinding and polishing for disposal.

2、Repair the hole surface

The stone holes on the marble platform are also a defect area formed by long-term use of the stone.Of course,before repairing the holes on the marble platform,the holes should be cleaned locally,and then the dust should be sucked off with a vacuum cleaner.Then,the same quality of discarded stone should be crushed.The discarded stone should also be cleaned and mixed with resin adhesive to stop filling.The filling should be slightly higher than the stone surface by 3-4 mm.After the resin adhesive dries thoroughly,Use a polishing machine to polish and wait for innovation.

3、Repair splicing joints

During the process of stopping the laying of some stones on the marble platform,there will be joint phenomena.Without strict treatment,the joint between stones will inevitably form a black joint between stones.Before innovation,the black joint should be cleaned with a needle,blade,or a sewing machine,and then cleaned with a vacuum cleaner to remove dirt from the black joint,Afterwards,use Dingli glue to adjust the color to be close to the stone and level all the gaps(slightly 0.2mm higher than the stone).

4、Repair cracks

Cracks on the marble platform are also one of the problems that stone will encounter after long-term use.To stop repairing cracks on the marble platform,first clean the dirt in the cracks,then use a vacuum cleaner to suck up the dust in the cracks,and use crack repair adhesive to stop repairing the cracks