What are the features of the 3D flexible welding fixture series

Support angle iron characteristics

1.Fixed hole locking or adjustable positioning fixed locking

2.After fixing the angle iron,there are three directions for flexible connection

3.Fine adjustment of slot hole position and convenient connection

4.A standard 90 degree right angle can be used for vertical root positioning

5.Support components extending from the fixture table to the surrounding area

6.Overall casting molding,beautiful and stable

7.The cast iron platform can be freely adjusted and positioned

8.Square application can be used as a large-scale positioning application

Characteristics of Corner Connection Blocks and Columns

1.Specification 200*200*175,with standard connection holes on the side

2.Can serve as a platform and three-dimensional expansion adapter for square boxes

3.Pipe diameter less thanΦ200 can be used as a V qualitative component

Positioning ruler characteristics

The positioning ruler has two working faces,which are used for:

1.The fixture tabletop and accessories can be adjusted and positioned arbitrarily,and the adjustment amount of 25mm is an integral multiple

2.Can be used for positioning and clamping at 45°,90°,135°,and 180°

3.Can be used to install fixtures with elbow joint fixing plates

The characteristics of a flat angle ruler

1.Able to stop arbitrary adjustments and locate

2.Can be used for positioning and clamping at 45°,90°,135°,and 180°

Characteristics of anglers

1.Adjusting the arbitrary angle range from 0 to 225 degrees

2.Can be used as a foundation positioning component

3.360 dial for clear viewing of angle changes

4.Both degree and vertical application are acceptable

5.Standardized hole positions can be easily connected and combined with other accessories

The characteristics of positioning angle rulers

1.Choose different specifications of angle rulers based on the required positioning height of the workpiece

2.With the support of strip holes,it can be used as a fine-tuning positioning component

3.The coordination and positioning of angle rulers allow for arbitrary height and angle

4.Can be used as a compression component support

5.Can be used as a 90 degree standard ruler